Name: EA-PSI 10360-15 2U
Brand: TPS ELECTRIC LLC
Availability: InStock
Rating: 5 (1 reviews)

EA-PSI 10360-15 2U

0-360V adjustable voltage, 0-15A current, and 1500W auto-ranging power in a compact 2U 19" rack chassis. Built-in function generator with sine/triangle/arbitrary/PV/fuel cell modes, touchscreen HMI, analog & digital remote control, master-slave parallel up to 192kW, and full protections (OVP/OCP/OPP/OT). Ideal for solar inverter MPPT testing, battery charging, automotive electronics, and automated test systems.

Cooling

Water Cooled (Optional)

Output Current

0-15A

Output Power

1500W

Output Voltage

0-360V

Type

Characteristic Curve

U/I/P autoranging

External Control

Analogue 0-5V/0-10V, USB, LAN, Modbus TCP, Profibus, DeviceNet, RS232, CAN

Housing

19" rack

Human Interface

Touch panel & Menu

Special Feature

Function Generator

30-Second Fit Check

Output: 0-360V, 0-15A, 1500W with true autoranging (U/I/P).

AC input: 110-127V / 208-240V ±10% (single phase or two-phase), 45-65Hz. On 110V input, output derates to 1200W.

Efficiency: ≤94.5% at full load and full output voltage.

Regulation: Load regulation CV ≤0.05% FS, line regulation ≤0.01% FS.

Ripple: 30mV rms / 300mV pp (CV mode, 300 kHz BW).

Protections: Adjustable OVP, OCP, OPP, plus OT, PF, and safety OVP on 60V models.

What It Is + Why It Matters

High-precision programmable DC power supply for R&D labs, production test, battery charging, and PV inverter testing.

Autoranging output delivers full power across wide voltage/current range – no manual range switching.

Built-in function generator with sine, triangle, rectangle, trapezoid, arbitrary (99 points), ramp, DIN 40839, plus PV and fuel cell simulation (EN 50530 compliant).

Master-Slave parallel operation – up to 64 units for 192kW total power; genuine current sharing via Share bus and digital MS bus.

High stability: temp coefficient CV ≤30ppm/°C after warm-up.

Note: Remote sensing compensates up to 5% of U_Nom. Always use DC terminal covers when hazardous voltages present.

Key Specs (EA-PSI 10360-15 2U)

Voltage range: 0-360V (adjustable).

Current range: 0-15A (adjustable).

Power range: 1500W (autoranging).

Internal resistance simulation: 0.8Ω – 1600Ω.

Rise/Fall time (CV): ≤20ms (10-90%).

Display accuracy: Voltage ≤0.05% FS, Current ≤0.1% FS.

Insulation: AC input to DC output 3750Vrms; DC output to case up to ±1000V (negative pole).

Cooling: Variable speed fan (front intake, rear exhaust). Optional water cooling available.

Interfaces & Remote Control

Standard digital: USB (rear B port) + Ethernet (100M) supporting SCPI and ModBus RTU; USB host (front) for data logging and sequence loading.

Built-in analog interface (15-pin D-Sub): 0-5V / 0-10V selectable range for set/readback of U/I/P/R; includes remote on/off, alarm outputs (OT/OVP/OCP/OPP), and CV/CC status.

Optional plug-in modules (IF-AB series): CAN, CANopen, RS232, ModBus TCP, Profinet (1P/2P), Profibus, EtherCAT – installable without opening the device.

Web server on LAN port for network configuration and manual SCPI commands.

Remote sense for voltage drop compensation (max 5% of U_Nom).

Best for / Not for

Best for: Solar inverter MPPT testing (PV simulation EN50530), battery charge/discharge profiling, automotive electronics (DIN 40839 engine start curve), automated test equipment (ATE), fuel cell simulation, and production line burn-in.

Not for: Applications requiring output above 360V or above 15A per single unit (use master-slave parallel to scale current); fixed single-voltage unregulated supplies.

Selection Checklist + Integration

Confirm AC supply: 208-240V recommended for full 1500W; on 110-127V derated to 1200W.

DC cable cross-section: For 15A / 5m length, use at least 4mm² (AWG10); refer to manual table for longer runs.

Mounting: 19" rack, 2U height, allow >30cm rear clearance for airflow.

For master-slave parallel: Connect Share bus (BNC) and MS bus (RJ45 CAT5); configure termination (BIAS/TERM) per manual.

For PV simulation: Prepare IU table (4096 points) on USB or use internal EN50530 day trend; connect a solar inverter as load.

Firmware: KE/HMI 3.02+ recommended for extended PV functions and SEMI F47 support.

We use Cookie to improve your online experience. By continuing browsing this website, we assume you agree our use of Cookie.